Vous pouvez mettre à jour votre Defender via votre système Pivi Pro. Les mises à jour de votre véhicule vous offriront les dernières fonctionnalités et assureront une stabilité optimale à tous les niveaux, notamment le moteur, la transmission, l'électronique intérieure et les systèmes d'infodivertissement. Certaines mises à jour logicielles de rappel peuvent désormais être effectuées à distance.
Une fois la mise à jour entièrement téléchargée sur le véhicule et prête à être installée, une icône de notification indiquera que la mise à jour est disponible avec un lien « En savoir plus » pour vous amener à l'écran des paramètres de mise à jour du logiciel.
Vous recevrez également une notification contextuelle à la coupure du contact pour vous demander d'accepter la mise à jour.
Assurez-vous que le véhicule se trouve dans une zone de bonne couverture réseau (Wi-Fi ou données mobiles).
Pour planifier la mise à jour, appuyez sur « Planifier », sélectionnez la date et l'heure, puis appuyez sur OK. Sinon, appuyez sur « Mettre à jour maintenant ».
Avant la mise à jour, fermez toutes les fenêtres, verrouillez et armez le véhicule. Laissez le véhicule pendant la durée indiquée dans la notification contextuelle.
Si vous sélectionnez « Mettre à jour maintenant », le véhicule attendra 10 minutes avant de lancer la mise à jour. Démarrer le véhicule pendant cette période annulera la tentative de mise à jour. Lorsque la mise à jour est programmée, la voiture démarre la mise à jour à l'heure prévue.
Le véhicule effectue des contrôles de sécurité avant d'appliquer la mise à jour, y compris, mais sans s'y limiter :
Si l'une des conditions n'est pas remplie, la mise à jour ne se poursuivra pas. L'écran de mise à jour du logiciel fournira des conseils sur la façon de remédier à ce problème avant une nouvelle tentative.
Si toutes les conditions sont remplies, le véhicule lance alors la mise à jour.
Pendant la mise à jour, vous ne pourrez pas utiliser le véhicule. Cette interruption peut durer entre 30 et 90 minutes. La plupart des systèmes du véhicule sont indisponibles pendant la mise à jour, mais vous pourrez déverrouiller/verrouiller et accéder au véhicule. Pour les véhicules équipés de poignées de porte escamotables, veuillez consulter le manuel du propriétaire pour savoir comment les utiliser.
À votre retour à votre véhicule, tous les systèmes de votre véhicule démarreront avec le nouveau logiciel. Une notification vous informera de la réussite de la mise à jour. L'écran de mise à jour affichera le nouveau numéro de version ainsi qu'une note de version expliquant toutes les modifications et améliorations.
Tout va bien, cet écran reste vide jusqu'à ce que vous receviez votre première mise à jour logicielle par liaison radio (SOTA) ; les mises à jour effectuées chez le revendeur ne sont pas reflétées sur cet écran.
Les nouveaux véhicules doivent se connecter à nos serveurs et restituer les versions logicielles de tous les calculateurs. Cela les incitera à être inclus dans la prochaine vague de mise à jour si une mise à jour est nécessaire.
Non, tous les véhicules doivent effectuer les mises à jour logicielles dans l'ordre, car nous pouvons mettre à jour la plupart des modules de votre véhicule. Chaque version dépend des versions précédentes pour garantir la stabilité et la compatibilité du système.
Après une mise à jour, il peut y avoir un délai avant que votre véhicule ne reçoive la version suivante, car les mises à jour sont mises en file d'attente.
12 V – Pour certaines mises à jour plus importantes, nous exigeons que la batterie 12 V soit chargée à un niveau élevé. Si ce problème survient, veuillez conduire votre véhicule plus longtemps avant de réessayer la mise à jour afin de lui laisser le temps de recharger la batterie 12 V.
Les conditions préalables sont utilisées pour garantir que les mises à jour ne sont tentées que lorsque le véhicule est dans un état sûr.
Pendant la mise à jour, tous les composants SOTA prennent en charge l'un des mécanismes de sécurité suivants :
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
• Maps in the Driver Display may be replaced by a blank area.
• Audio may continue to play after exiting the vehicle.
• Apple CarPlay / Android Auto icon on the home screen opens the incorrect screen.
• The interface for suspension ride height may freeze.
• The last used radio station is incorrectly recalled on the next journey.
• Correction to the ride height dimensions in the 4x4i app ‘dimensions’ tab on applicable vehicles.
• New Speed limit Notification has moved from the Driver Assistance Menu to the Cruise and Limiter Menu. The audio notification can now be permanently set on/off in the new menu and is no longer affected by the Driver Assistance Settings.
This update also brings improvements to the following features and systems:
• Touchscreen stability.
• Bluetooth stability.
• Apple CarPlay stability.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
• Maps in the Driver Display may be replaced by a blank area.
• Audio may continue to play after exiting the vehicle.
• Apple CarPlay / Android Auto icon on the home screen opens the incorrect screen.
• The interface for suspension ride height may freeze.
• The last used radio station is incorrectly recalled on the next journey.
• Correction to the ride height dimensions in the 4x4i app ‘dimensions’ tab on applicable vehicles.
• New Speed limit Notification has moved from the Driver Assistance Menu to the Cruise and Limiter Menu. The audio notification can now be permanently set on/off in the new menu and is no longer affected by the Driver Assistance Settings.
This update also brings improvements to the following features and systems:
• Touchscreen stability.
• Bluetooth stability.
• Apple CarPlay stability.
This update prepares systems for upcoming feature and performance enhancements.
This update also brings improvements to the following features and systems:
• Wireless device Charging: Improved detection and adaption to phones resulting in the initiation of charging being less sensitive to device location. Updates to communication with Apple devices running the latest iOS releases.
• Charging on applicable PHEV vehicles.
• Diagnostics for the main HV battery.
• PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Software updates require at least 25% battery charge.
This update prepares systems for upcoming feature and performance enhancements.
This update also brings improvements to the following features and systems:
• Wireless device Charging: Improved detection and adaption to phones resulting in the initiation of charging being less sensitive to device location. Updates to communication with Apple devices running the latest iOS releases.
• Charging on applicable PHEV vehicles.
• Diagnostics for the main HV battery.
• PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Software updates require at least 25% battery charge.
This update enables improvements to SOTA (Software Over The Air) capability.
Please note: If the vehicle is plugged in but not currently charging, you will need to schedule the update for the same time the vehicle is scheduled to be charging or disconnect the charging cable. Over the air updates can not be carried out whilst using rapid 'DC' chargers
PHEV only: Please note that for a short period of time, you may experience some disruption in the EV capabilities after the update has completed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update enables improvements to SOTA (Software Over The Air) capability.
Please note: If the vehicle is plugged in but not currently charging, you will need to schedule the update for the same time the vehicle is scheduled to be charging or disconnect the charging cable. Over the air updates can not be carried out whilst using rapid 'DC' chargers.
PHEV only: Please note that for a short period of time, you may experience some disruption in the EV capabilities after the update has completed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update enables improvements to SOTA (Software Over The Air) capability.
Please note: If the vehicle is plugged in but not currently charging, you will need to schedule the update for the same time the vehicle is scheduled to be charging or disconnect the charging cable. Over the air updates can not be carried out whilst using rapid 'DC' chargers
PHEV only: Please note that for a short period of time, you may experience some disruption in the EV capabilities after the update has completed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update enables improvements to SOTA (Software Over The Air) capability.
Please note: If the vehicle is plugged in but not currently charging, you will need to schedule the update for the same time the vehicle is scheduled to be charging or disconnect the charging cable. Over the air updates can not be carried out whilst using rapid 'DC' chargers
PHEV only: Please note that for a short period of time, you may experience some disruption in the EV capabilities after the update has completed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update enables improvements to SOTA (Software Over The Air) capability.
Please note: If the vehicle is plugged in but not currently charging, you will need to schedule the update for the same time the vehicle is scheduled to be charging or disconnect the charging cable. Over the air updates can not be carried out whilst using rapid 'DC' chargers
PHEV only: Please note that for a short period of time, you may experience some disruption in the EV capabilities after the update has completed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update enables improvements to SOTA (Software Over The Air) capability.
Please note: If the vehicle is plugged in but not currently charging, you will need to schedule the update for the same time the vehicle is scheduled to be charging or disconnect the charging cable. Over the air updates can not be carried out whilst using rapid 'DC' chargers
PHEV only: Please note that for a short period of time, you may experience some disruption in the EV capabilities after the update has completed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update enables improvements to SOTA (Software Over The Air) capability.
Please note: If the vehicle is plugged in but not currently charging, you will need to schedule the update for the same time the vehicle is scheduled to be charging or disconnect the charging cable. Over the air updates can not be carried out whilst using rapid 'DC' chargers
PHEV only: Please note that for a short period of time, you may experience some disruption in the EV capabilities after the update has completed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update provides Driver Display (Instrument cluster) stability improvements and associated display settings issue such as the default speed units.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has been installed. Software updates require at least 25% battery charge.
This update provides Driver Display (Instrument cluster) stability improvements and associated display settings issue such as the default speed units.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has been installed. Software updates require at least 25% battery charge.
This update provides Driver Display (Instrument cluster) stability improvements and associated display settings issue such as the default speed units.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has been installed. Software updates require at least 25% battery charge.
This update provides Driver Display (Instrument cluster) stability improvements and associated display settings issue such as the default speed units.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has been installed. Software updates require at least 25% battery charge.
This update provides Driver Display (Instrument cluster) stability improvements and associated display settings issue such as the default speed units.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has been installed. Software updates require at least 25% battery charge.
This update provides Driver Display (Instrument cluster) stability improvements and associated display settings issue such as the default speed units.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has been installed. Software updates require at least 25% battery charge.
This update provides Driver Display (Instrument cluster) stability improvements and associated display settings issue such as the default speed units.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has been installed. Software updates require at least 25% battery charge.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
• Maps in the Driver Display may be replaced by a blank area.
• Audio may continue to play after exiting the vehicle.
• Apple CarPlay / Android Auto icon on the homescreen opens the incorrect screen.
• The interface for suspension ride height may freeze.
• The last used radio station is incorrectly recalled on the next journey.
• Correction to the ride height dimensions in the 4x4i app ‘dimensions’ tab on applicable vehicles.
• New Speed limit Notification has moved from the Driver Assistance Menu to the Cruise and Limiter Menu. The audio notification can now be permanently set on/off in the new menu and is no longer affected by the Driver Assistance Settings.
• Loss of steering assist on start-up.
This update also brings improvements to the following features and systems:
• Touchscreen stability.
• Bluetooth stability.
• Apple CarPlay stability.
• Improved stability feel on low friction surfaces.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
• Maps in the Driver Display may be replaced by a blank area.
• Audio may continue to play after exiting the vehicle.
• Apple CarPlay / Android Auto icon on the homescreen opens the incorrect screen.
• The interface for suspension ride height may freeze.
• The last used radio station is incorrectly recalled on the next journey.
• Correction to the ride height dimensions in the 4x4i app ‘dimensions’ tab on applicable vehicles.
• New Speed limit Notification has moved from the Driver Assistance Menu to the Cruise and Limiter Menu. The audio notification can now be permanently set on/off in the new menu and is no longer affected by the Driver Assistance Settings.
• Loss of steering assist on start-up.
This update also brings improvements to the following features and systems:
• Touchscreen stability.
• Bluetooth stability.
• Apple CarPlay stability.
• Improved stability feel on low friction surfaces.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
• Maps in the Driver Display may be replaced by a blank area.
• Audio may continue to play after exiting the vehicle.
• Apple CarPlay / Android Auto icon on the homescreen opens the incorrect screen.
• The interface for suspension ride height may freeze.
• The last used radio station is incorrectly recalled on the next journey.
• Correction to the ride height dimensions in the 4x4i app ‘dimensions’ tab on applicable vehicles.
• New Speed limit Notification has moved from the Driver Assistance Menu to the Cruise and Limiter Menu. The audio notification can now be permanently set on/off in the new menu and is no longer affected by the Driver Assistance Settings.
• Loss of steering assist on start-up.
This update also brings improvements to the following features and systems:
• Touchscreen stability.
• Bluetooth stability.
• Apple CarPlay stability.
• Improved stability feel on low friction surfaces.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
• Maps in the Driver Display may be replaced by a blank area.
• Audio may continue to play after exiting the vehicle.
• Apple CarPlay / Android Auto icon on the homescreen opens the incorrect screen.
• The interface for suspension ride height may freeze.
• The last used radio station is incorrectly recalled on the next journey.
• Correction to the ride height dimensions in the 4x4i app ‘dimensions’ tab on applicable vehicles.
• New Speed limit Notification has moved from the Driver Assistance Menu to the Cruise and Limiter Menu. The audio notification can now be permanently set on/off in the new menu and is no longer affected by the Driver Assistance Settings.
This update also brings improvements to the following features and systems:
• Touchscreen stability.
• Bluetooth stability.
• Apple CarPlay stability.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
• Maps in the Driver Display may be replaced by a blank area.
• Audio may continue to play after exiting the vehicle.
• Apple CarPlay / Android Auto icon on the homescreen opens the incorrect screen.
• The interface for suspension ride height may freeze.
• The last used radio station is incorrectly recalled on the next journey.
• Correction to the ride height dimensions in the 4x4i app ‘dimensions’ tab on applicable vehicles.
• New Speed limit Notification has moved from the Driver Assistance Menu to the Cruise and Limiter Menu. The audio notification can now be permanently set on/off in the new menu and is no longer affected by the Driver Assistance Settings.
This update also brings improvements to the following features and systems:
• Touchscreen stability.
• Bluetooth stability.
• Apple CarPlay stability.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
• Maps in the Driver Display may be replaced by a blank area.
• Audio may continue to play after exiting the vehicle.
• Apple CarPlay / Android Auto icon on the homescreen opens the incorrect screen.
• The interface for suspension ride height may freeze.
• The last used radio station is incorrectly recalled on the next journey.
• Correction to the ride height dimensions in the 4x4i app ‘dimensions’ tab on applicable vehicles.
• New Speed limit Notification has moved from the Driver Assistance Menu to the Cruise and Limiter Menu. The audio notification can now be permanently set on/off in the new menu and is no longer affected by the Driver Assistance Settings.
This update also brings improvements to the following features and systems:
• Touchscreen stability.
• Bluetooth stability.
• Apple CarPlay stability.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
• Maps in the Driver Display may be replaced by a blank area.
• Audio may continue to play after exiting the vehicle.
• Apple CarPlay / Android Auto icon on the homescreen opens the incorrect screen.
• The interface for suspension ride height may freeze.
• The last used radio station is incorrectly recalled on the next journey.
• Correction to the ride height dimensions in the 4x4i app ‘dimensions’ tab on applicable vehicles.
This update also brings improvements to the following features and systems:
• Touchscreen stability.
• Bluetooth stability.
• Apple CarPlay stability.
• Charging on applicable PHEV vehicles.
Drivetrain:
• Resolves the possibility of a false engine warning light being shown (applicable Petrol engines only).
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
• Maps in the Driver Display may be replaced by a blank area.
• Audio may continue to play after exiting the vehicle.
• Apple CarPlay / Android Auto icon on the homescreen opens the incorrect screen.
• The interface for suspension ride height may freeze.
• The last used radio station is incorrectly recalled on the next journey.
• Correction to the ride height dimensions in the 4x4i app ‘dimensions’ tab on applicable vehicles.
• Sound may be played through the incorrect audio channel on Meridian Sound System on 24MY.
This update also brings improvements to the following features and systems:
• Touchscreen stability.
• Bluetooth stability.
• Apple CarPlay stability.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
• Maps in the Driver Display may be replaced by a blank area.
• Audio may continue to play after exiting the vehicle.
• Apple CarPlay / Android Auto icon on the homescreen opens the incorrect screen.
• The interface for suspension ride height may freeze.
• The last used radio station is incorrectly recalled on the next journey.
• Correction to the ride height dimensions in the 4x4i app ‘dimensions’ tab on applicable vehicles.
• Sound may be played through the incorrect audio channel on Meridian Sound System on 24MY and 24MY.
This update also brings improvements to the following features and systems:
• Touchscreen stability.
• Bluetooth stability.
• Apple CarPlay stability.
• Charging on applicable PHEV vehicles.
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
• Maps in the Driver Display may be replaced by a blank area.
• Audio may continue to play after exiting the vehicle.
• Apple CarPlay / Android Auto icon on the homescreen opens the incorrect screen.
• The last used radio station is incorrectly recalled on the next journey.
• Correction to the ride height dimensions in the 4x4i app ‘dimensions’ tab on applicable vehicles.
• Sound may be played through the incorrect audio channel on Meridian Sound System.
This update also brings improvements to the following features and systems:
• Touchscreen stability.
• Bluetooth stability.
• Apple CarPlay stability.
• Charging on applicable PHEV vehicles.
Drivetrain:
• Resolves the possibility of a false engine warning light being shown (applicable Petrol engines only).
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
• Maps in the Driver Display may be replaced by a blank area.
• Audio may continue to play after exiting the vehicle.
• Apple CarPlay / Android Auto icon on the homescreen opens the incorrect screen.
• The last used radio station is incorrectly recalled on the next journey.
• Correction to the ride height dimensions in the 4x4i app ‘dimensions’ tab on applicable vehicles.
• Rear Traffic Alert may be inaudible in some instances on 24MY.
• Sound may be played through the incorrect audio channel on Meridian Sound System on 23MY and 24MY.
This update also brings improvements to the following features and systems:
• Charging on applicable PHEV vehicles.
Drivetrain:
• Resolves the possibility of a false engine warning light being shown (applicable Petrol engines only).
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
• Maps in the Driver Display may be replaced by a blank area.
• Audio may continue to play after exiting the vehicle.
• Apple CarPlay / Android Auto icon on the homescreen opens the incorrect screen.
• The interface for suspension ride height may freeze.
• The last used radio station is incorrectly recalled on the next journey.
• Correction to the ride height dimensions in the 4x4i app ‘dimensions’ tab on applicable vehicles.
• Sound may be played through the incorrect audio channel on Meridian Sound System on 23MY and 24MY.
This update also brings improvements to the following features and systems:
• Charging on applicable PHEV vehicles.
• Diagnostics for the main HV battery.
Drivetrain:
• Improvement to driveability and smoothness at low speeds (V8 engines).
• Resolves the possibility of a false engine warning light being shown (applicable Petrol engines only).
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
This update includes a number of general interface and performance improvements as well as resolving the following specific issues. Thank you for your feedback.
• Maps in the Driver Display may be replaced by a blank area.
• Audio may continue to play after exiting the vehicle.
• Apple CarPlay / Android Auto icon on the homescreen opens the incorrect screen.
• The interface for suspension ride height may freeze.
• The last used radio station is incorrectly recalled on the next journey.
• Correction to the ride height dimensions in the 4x4i app ‘dimensions’ tab on applicable vehicles.
• Sound may be played through the incorrect audio channel on Meridian Sound System on 23MY and 24MY.
This update also brings improvements to the following features and systems:
• Charging on applicable PHEV vehicles.
• Diagnostics for the main HV battery.
Drivetrain:
• Improvement to driveability and smoothness at low speeds (V8 engines).
• Resolves the possibility of a false engine warning light being shown (applicable Petrol engines only).
PHEV only: Please note that for a short period of time, you may experience some disruption in your EV capabilities after the update has installed. Please disconnect the vehicle charger and ensure the battery has a minimum charge level of 25% before starting the update.
Cette mise à jour prépare le système aux fonctionnalités et améliorations de performances à venir.
With our continued drive to deliver improvements to your vehicle, this update brings enhancements to the following systems:
• Wireless Device Charging.
• Improved detection and adaption to phones resulting in the initiation of charging being less sensitive to device location. Updates to communication with Apple devices running the latest iOS releases.
High Voltage (HV) Battery Charge Control:
Changes to the control of the charging cable locking pin to reduce the possibility of an unresponsive locking pin.
Changes to the charge indicator LED behaviour
• The flashing white LED charge indicator no longer illuminates when attempting to plug-in the charge cable when the locking pin is already in a locked position.
• If the charging pin is stuck in a midway position during locking attempt, a Rapid flashing white LED to indicate the error condition. In such cases recommend removal/reinsertion of charging cable.
Sound System:
General calibration & system volume refinements including a fix for an issue where the audio could be heard through an incorrect speaker channel.
ABS (Anti-Lock Braking System):
• Updates to remove noises from ABS modulator to mitigate customer complaints ((applicable to New Range Rover (L460) and New Range Rover Sport (L461)).
• Better detection and response for DTC C055E System Stiffness.
Vehicles without Surround Cameras:
Added automatic display of the rear view when the vehicle rolls back plus other general performance improvements.
Powertrain:
PHEV Vehicles fitted with Belt Integrated Starters:
Resolved an issue that could result in a delayed engine start.
V8 Engine Defenders:
Improvements to oil monitoring systems.
Jaguar I-PACE (21MY Only – already included in later models):
Improvements to cold weather range prediction accuracy.
Improved support for Charge Now.
Fixed Time charging now works across multiple days.
Improved range estimation for vehicles fitted with 20" wheels.
Improved range estimation impact influenced by the vehicle’s climate control system.
Range estimation updates more frequently, preventing unexpected range drop off at lower range values.
Defender and Discovery 6-cylinder vehicles:
Resolved an issue where the O2 sensor could incorrectly result in the display of an engine warning light.
All other vehicles:
General powertrain refinements.
In this release our Driving Assistance and Vehicle Dynamics teams have created a number of improvements to the performance of a number of vehicle control systems and consequently enhanced the vehicle's refinement.
Adaptive Cruise Control with Steering Assist / Lane Keep Assist (Please note: Not all of the below improvements are applicable to vehicles with only Lane Keep Assist):
Smoother assisted steering for road layouts which include direction changes, lanes splitting and road marking transitions.
Image processing improvements for surface estimation.
Calibration updates improving lane corridor quality & consistency, resulting in smoother steering through corners.
Improved determination of road edges.
Several line geometry related image processing refinements to help avoid false positives.
Improvements when managing cross junctions with no lane markings.
Emergency Braking:
General performance refinements.
Traffic Sign Recognition:
General improvement in sign recognition.
All models
IMPORTANT – CHANGES TO PROFILES
Markets where InControl Accounts are supported:
To provide greater flexibility and opportunity in future updates, it’s been necessary to redevelop Profiles (referred to as Accounts after the update).
Please Note: Only personal settings and navigation destinations as part of a Profile linked to a signed in InControl Account PRIOR to this update will be preserved. Profiles not linked to a signed in InControl Account will need to be recreated after the update.
Markets where InControl Accounts are not supported:
Profiles will no longer be supported following this update and therefore personal profiles will no longer be accessible. We apologise for any inconvenience these changes may cause. This update brings a number of significant new features as follows:
New features
• The Interactive Driver Display (where fitted) can now display Google Maps when Android AutoTM is in use or Apple Maps when Apple CarPlay® is in use. Please note: Support for this capability via other navigation apps is subject to the necessary updates being released by their respective developers. The Digital Driver Display and Analogue Dials with Central TFT Display are unsupported.
• Apple iPhone Favourite contacts can now be accessed directly from the Pivi homescreen phone tile or via the contacts tab within Pivi’s Phone app.
• Following feedback, we’ve added a phone reminder which can be displayed when you shut the vehicle down for those vehicles with Wireless Device Charging.
• The Pivi Pro navigation app for Range Rover & Range Rover Sport PHEV vehicles can now display a range overlay on the map. This is visible when no destination is set.
• Wireless Android AutoTM & Wireless Apple CarPlay® is now available in more countries.
Features we’ve improved or changed
• We’ve made changes to the traffic info and the text colour making it more useful and readable. This especially improves the available information when the Interactive Driver Display is in full screen map view and the traffic list is shown.
• In the Navigation / About settings the map information now shows the date each region was last updated. Note: the region your vehicle is located in is automatically updated over the air in most markets where there is a valid Connected Navigation Subscription.
• The Map & Service subscription expiry date is now visible from the map information screen. - Phone settings have been reorganised combining Bluetooth and Android AutoTM / Apple CarPlay® settings.
• A variety of bug fixes and general performance improvements.
• Profiles are now referenced as Accounts in the touchscreen.
Please Note: Availability of features can vary by vehicle specification, model year and market.
Enhanced High Voltage battery cell (primary battery) health monitoring/management. This is a required update and forms the delivery of the recall remedy for safety recall H441.
IMPORTANT – CHANGES TO PROFILES
Markets where InControl Accounts are supported: To provide greater flexibility and opportunity in future updates, it’s been necessary to redevelop Profiles (referred to as Accounts after the update).
Please Note: Only personal settings and navigation destinations as part of a Profile linked to a signed in InControl Account PRIOR to this update will be preserved.
Profiles not linked to a signed in InControl Account will need to be recreated after the update. Markets where InControl Accounts are not supported: Profiles will no longer be supported following this update and therefore personal profiles will no longer be accessible.
We apologise for any inconvenience these changes may cause. This update brings a number of significant new features as follows:
New features
• The Interactive Driver Display (where fitted) can now display Google Maps when Android AutoTM is in use or Apple Maps when Apple CarPlay® is in use. Please note: Support for this capability via other navigation apps is subject to the necessary updates being released by their respective developers. The Digital Driver Display and Analogue Dials with Central TFT Display are unsupported.
• Apple iPhone Favourite contacts can now be accessed directly from the Pivi homescreen phone tile or via the contacts tab within Pivi’s Phone app.
• Following feedback, we’ve added a phone reminder which can be displayed when you shut the vehicle down for those vehicles with Wireless Device Charging.
• Wireless Android AutoTM & Wireless Apple CarPlay® is now available in more countries.
Features we’ve improved or changed
• We’ve made changes to the traffic info and the text colour making it more useful and readable. This especially improves the available information when the Interactive Driver Display is in full screen map view and the traffic list is shown.
• In the Navigation / About settings the map information now shows the date each region was last updated. Note: the region your vehicle is located in is automatically updated over the air in most markets where there is a valid Connected Navigation Subscription.
• The Map & Service subscription expiry date is now visible from the map information screen.
• Phone settings have been reorganised combining Bluetooth and Android AutoTM / Apple CarPlay® settings.
• A variety of bug fixes and general performance improvements.
• Profiles are now referenced as Accounts in the touchscreen.
Please Note: Availability of features can vary by vehicle specification, model year and market.
H473 Fonctionnement du système de fluide d'échappement diesel – Mise à jour (X760 24MY uniquement) :
Un certain nombre de véhicules nécessitent une mise à jour pour garantir le bon fonctionnement du système DEF (fluide d'échappement diesel, parfois appelé AdBlu) lorsque le niveau de DEF est épuisé. Cette mise à jour empêche tout redémarrage une fois le DEF complètement épuisé et l'avertissement final indiquant l'absence de DEF s'affiche jusqu'à ce que le DEF soit suffisamment rempli.
N867 Fonctionnement du système de fluide d'échappement diesel – Mise à jour (L560 24MY uniquement) :
Un certain nombre de véhicules nécessitent une mise à jour pour garantir le bon fonctionnement du système DEF (fluide d'échappement diesel, parfois appelé AdBlu) lorsque le niveau de DEF est épuisé. Cette mise à jour garantit qu'un redémarrage n'est pas possible une fois que le DEF est complètement épuisé et que l'avertissement final indiquant qu'aucun DEF n'est affiché jusqu'à ce que le DEF soit suffisamment réapprovisionné.
Remarque : une fois cette mise à jour effectuée, il ne sera pas nécessaire de contacter votre revendeur pour le problème décrit ci-dessus.
Pour plus d'informations, veuillez vous référer au bulletin de rappel officiel « H473/N867 » pour toutes les informations relatives au rappel.
N810 - Headlamp Inoperative Recall Update
During ongoing quality assessment and improvement of our Range Rover and Range Rover Sport vehicles, a potential issue has been identified which could result in one or both headlamps becoming inoperative.
This important software update for the Headlamp Control Modules prevents the possibility of such an issue arising and therefore it is highly recommended to allow this update as soon as possible.
Please note: Once this update has been performed it will not be necessary to contact your retailer for the above described issue.
For further information, please refer to the official recall bulletin N810 for all recall related information.
*Une future mise à jour permettra aux véhicules BEV de se mettre à jour pendant la charge